AED 40.00 per sheet | incl. 5% VAT, excl. Shipping
AED 40.00 per sheet | incl. 5% VAT, excl. Shipping
AED 40.00 per sheet | incl. 5% VAT, excl. Shipping
AED 40.00 per sheet | incl. 5% VAT, excl. Shipping
AED 50.00 per sheet | incl. 5% VAT, excl. Shipping
AED 40.00 per sheet | incl. 5% VAT, excl. Shipping
AED 40.00 per sheet | incl. 5% VAT, excl. Shipping
AED 40.00 per sheet | incl. 5% VAT, excl. Shipping
AED 40.00 per sheet | incl. 5% VAT, excl. Shipping
AED 40.00 per sheet | incl. 5% VAT, excl. Shipping
AED 40.00 per sheet | incl. 5% VAT, excl. Shipping
AED 40.00 per sheet | incl. 5% VAT, excl. Shipping
AED 40.00 per sheet | incl. 5% VAT, excl. Shipping
AED 40.00 per sheet | incl. 5% VAT, excl. Shipping
AED 40.00 per sheet | incl. 5% VAT, excl. Shipping
AED 40.00 per sheet | incl. 5% VAT, excl. Shipping
AED 50.00 per sheet | incl. 5% VAT, excl. Shipping
AED 50.00 per sheet | incl. 5% VAT, excl. Shipping
AED 35.00 per sheet | incl. 5% VAT, excl. Shipping
AED 35.00 per sheet | incl. 5% VAT, excl. Shipping
AED 40.00 per sheet | incl. 5% VAT, excl. Shipping
Features of Cast Acrylic Sheets:
Surface finish is as smooth as glass
Great anti-shatter performance: 7 to 18 times better than glass
lmpact strength is 10 times higher than that of glass
Half the weight of glass
lmpact strength remains unchanged at a low (-50℃) or high (100℃) temperature
Graet weatherability and aging-resistance
Great thermoformability
Good oil and chemical resistance
Low water absorption
Easily machined and thermoformed
Good glue-joint effectiveness
Colour types:
Transparent: Images can be viewed through sheet (like tinted glass)
Translucent: Light and shadows can be seen through the sheet
Fluorescent: The edge appears to glow under ambient light without adding a light source
Opaque: Neither light nor images can be seen through the sheet
Laser Cutting Cast Acrylic Sheets:
Cutting produces a highly polished edge
Engraving results in a frosted appearance
References to the Usage of Cast Acrylic Sheets:
Temperature: Acrylic sheets are softened with heating at 100°C or over. To prevent from becoming soft, please keep units beyond the place over 100°C.
Scratch: The hardness of surface is equivalent to aluminum, thus be careful to surface protection during process. If there are scratches on the surface of acrylic sheets, polish them with cleaner used for brass that can remove its brilliant surface.
Cleaning: Due to acrylic sheet with static electricity, clean the surface with soft and dry cloth wetted 1% soap water when there are dust on the surface.
Swell: The coefficient of heat is larger and its tension is about nine times of other metal materials. Remain enough space for its contractility to variable temperature while you install and fix acrylic sheets steady.
